Downtown Chicago, IL Mold Damage Remediation
It only takes a small water leak, or even excess humidity, for mold to form in your Downtown Chicago home or business. Then, mold can spread quickly through the property in as little as 48 hours. Mold can produce allergens and irritants, and it has the potential to cause other health effects. If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.
Learn more about mold and what to do until help arrives by reviewing these mold damage tips.
SERVPRO of Ravenswood
- 24-Hour Emergency Service
- Faster to Any Size Disaster
- Highly Trained Mold Remediation Technicians
- Specialized Mold Remediation Equipment
- A Trusted Leader in the Restoration Industry
- Locally Owned and Operated
If You See Signs of Mold, Call Us Today – (773) 878-5200
Microscopic mold spores exist almost everywhere, outdoors and indoors, making it impossible to remove all mold from a home or business. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:
- Mold is present almost everywhere, indoors and outdoors.
- Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
- Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins.
- Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
- Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
- Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.
Faster to Any Size Disaster
Mold spreads quickly, so a minor mold infestation can quickly escalate into a major problem. We’re dedicated to responding immediately when you contact us. A fast response lessens the damage, limits further damage, and reduces cost.
Locally Owned, with National Resources
We live and work in this community too; we might even be neighbors. As a locally owned and operated business, SERVPRO of Ravenswood is close by and ready to respond to your mold damage emergency. We are proud to be an active member of the Downtown Chicago community and want to pitch in and help make our community the best it can be.
We are proud to serve our local communities:
- Chicago, IL
- Downtown Chicago, IL
- Lincoln Square, IL
- Ravenswood, IL
- Uptown, IL
- Lakeview, IL
- Edgewater, IL
- Andersonville, IL
- Northcenter, IL
- Lincolnwood, IL
- Albany Park, IL
Highly Trained Water and Mold Restoration Specialists
As water and mold damage specialists, we have the experience, the expertise, and the advanced training that enables us to get your property restored quickly and thoroughly. Learn about our water and mold training and certificates.
The Mold Remediation Process
Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:
Step 1: Emergency Contact - (773) 878-5200
We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.
Step 2: Inspection and Mold Damage Assessment
We determine the scope of the mold damage by carefully inspecting your property for visible signs of mold. Since mold can be hidden, we use various technologies to detect mold and hidden water sources.
Step 3: Mold Containment
To keep the mold spores from spreading further, we will use various mold containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your Downtown Chicago, IL home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mold.
Step 4: Air Filtration
We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mold spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mold spores while the mold remediation is in process.
Step 5: Removing Mold and Mold-Infested Materials
Depending on the amount of mold growth and the types of surfaces involved, the mold remediation process can vary significantly. In general, we’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.
Step 6: Cleaning Contents and Sanitizing
SERVPRO of Ravenswood will use a variety of cleaning techniques and products to clean your furnishings and personal belongings. Since mold infestations also cause a persistent musty odor, our professionals are also trained to remove odors and provide deodorization using fogging equipment.
Step 7: Restoration
Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.
SERVPRO knows Mold
Here at SERVPRO of Ravenswood we understand what it takes to properly remediate a mold situation in Downtown Chicago, IL. Encountering mold can be worrisome for any homeowner, but SERVPRO is here to put your mind at ease. We have the right tools and trained professionals to get the job done right. Give us a call at (773) 878-5200 and we will be on our way to help.