If you have a fire or water emergency, please call us now at (773) 878-5200

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration
~system_services_default~ ~mold_no_service~

%Mold% Damage Remediation in %CITY%

%Mold% can produce allergens and irritants and has the potential to cause other health effects. %Mold% can spread quickly through your %CITYNOST% home or business in as little as 48 hours. If you suspect that your home or business has a %mold% problem, we can inspect and assess your property. If %mold% is found, we have the training, equipment, and expertise to remediate your %mold% infestation.

Learn more about %mold% and what to do until help arrives by reviewing these %mold% damage tips.

~unique_content~

%FRANCHISE%

If You See Signs of %Mold%, Call Us Today – %PHONENUMBER%

~default_resources~

Understanding Mold

Microscopic %mold% spores exist almost everywhere, outdoors and indoors, making it impossible to remove all %mold% from a home or business. Some restoration businesses advertise “%mold% removal” and even guarantee to remove all %mold%, which is a fallacy. Consider the following %mold% facts:

Faster to Any Size Emergency

In as little as 48 hours, a minor %mold% issue can quickly spread through a home or business. Once you contact us, we’re dedicated to starting the remediation process quickly. This fast response lessens the %mold% damage, limits additional damage, and reduces the remediation cost.

Locally Owned, with National Resources

We are proud to be an active member of this community. %FRANCHISE% is locally owned and operated, so we’re already nearby and ready to help %CITYNOST% residents and business owners with any size %mold% contamination.

%MOLDSERVINGAREAS%

Highly Trained Water and %Mold% Restoration Specialists

We are trained %mold% damage specialists who get started quickly to get your home or business back to normal, with specific training and certifications to handle your restoration needs. Learn about our water and %mold% training and certificates.

The %Mold% Remediation Process

Every %mold% damage scenario is different and requires a unique solution, but the general %mold% remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - %PHONENUMBER%

We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.

Step 2: Inspection and %Mold% Damage Assessment

We determine the scope of the mold damage by carefully inspecting your property for visible signs of %mold%. Since mold can be hidden, we use various technologies to detect %mold% and hidden water sources. 

Step 3: %Mold% Containment

To keep the %mold% spores from spreading further, we will use various %mold% containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your %CITY% home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of %mold%.

Step 4: Air Filtration

We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic %mold% spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these %mold% spores while the %mold% remediation is in process.

Step 5: Removing %Mold% and %Mold%-Infested Materials

Depending on the amount of %mold% growth and the types of surfaces involved, the %mold% remediation process can vary significantly. In general, we’ll use antifungal and antimicrobial treatments to eliminate %mold% colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.

Step 6: Cleaning Contents and Sanitizing

%FRANCHISE% will use a variety of cleaning techniques and products to clean your furnishings and personal belongings. Since %mold% infestations also cause a persistent musty odor, our professionals are also trained to remove %odors% and provide %deodorization% using fogging equipment.

Step 7: Restoration

During the remediation process, it’s often necessary to remove porous building materials like subfloors, drywall, and carpet. The restoration step returns your %CITY% home or business back to normal. Depending on the severity of %mold% damage, the restoration step may involve minor repairs, such as replacing drywall, or it may involve a substantial reconstruction project.

SERVPRO knows %Mold%

In %CITY%, %FRANCHISE% is ready to tackle and resolve any %mold% issues that arise. SERVPRO professionals understand the anxiety that can happen when a homeowner uncovers %mold%. Let us help put your worries to rest. Our knowledgeable crew is ready with the gear needed to tackle any %mold% job. Reach us at %PHONENUMBER% - We’re ready to activate our team to remediate your %mold%.